Rhodamine leak tracing dye

OceanTools C-Dye 530 has been specially formulated to give outstanding results when detecting leaks in a variety of subsea environments including pipelines, risers and subsea control systems.

• C-Dye 530 may be added to water at a suggested dosage of 200ppm or 0.02%

• C-Dye 530 may be added to control fluids at a suggested dosage of 250ppm or 0.025%

• C-Dye 530 may be added to cement at a suggested dosage of 0.33gal/bbl or 1.25l/bbl or around 0.8%

The dye may be added directly to the cement or seawater spacer during cementing operations, or even a barite spacer if the dye concentration is increased. It should not be added to spacers containing bentonitic materials, as they cloak the dye.

C-Dye 530 is registered with CEFAS in the UK (OCNS Class E) and the Netherlands (HMCS Pre-screening Category R) with no substitution warning. It holds Yellow classification in Norway, is registered for use in Denmark, and has also been successfully EPA/OSHA tested for use in the US. Few other dyes meet this very high level of environmental acceptance.

Key Features:

• Formulated for subsea leak detection

• Use in cement, seawater or fresh water

• Excellent environmental credentials

C-Dye 530 Datasheet

OceanTools C-Dye 530 Safety Data Sheet

For more information about OceanTools C-Dye 530, Contact the team at BlueZone.